Was it white?
How could it look so drastically different from image to image? None of the masks in later installments seem to have this apparent disparity.
Back in December 2009, I contacted Robb Wilson King, the set designer from part 3, who gave me some very important clues. He said the mask was painted an "off white" that was enhanced with what he described as a "slight aged patina" that gave it a "cream color" (all his words).
The original shooting script called for Jason to wear a white mask, so that was the starting point for the effects team. To make the white mask look creepier and fit with the rustic setting of the film, it was evidently sent to King to make it look older and weather-beaten.
Set designers will often use antiquing media found in art supply stores in order to make things on set look old and creepy. You can see the obvious crackling paint used in The Walking Dead in the Season 3 prison interiors, for example.
Robb Wilson King said he used an "aged patina" to make the mask look old. There are two main types of patinas: those used to age metal and those used to age oil paintings.
King probably use the same methods that oil painters have been using for decades to give their paintings an antique look: a combination of an amber patina varnish and a paint cracking medium, such as those made by Maimeri.
Patina varnishes come in several varieties and can give any paint work a subtle golden tone while maintaining the clarity of the underlying artwork. The tone can be deepened with additional coats, which can be applied with a sprayer.
There is evidence on the original mask that the white basecoat, the yellowish tone and the cracking were three separate layers. You can see it under the forehead and cheek chevrons. In the lower photo, there are still yellow varnished spots but with no cracks.
So for anyone who has been confused... remember watching part 3 back in the day and concluding Jason wore a white mask? Your childhood eyes weren't deceiving you. The mask was white.
So can a mask be painted just like the originals and come out the same? May as well try it. So I bought the Maimeri patina varnish and repainted a Crash project82v4 with Krylon Dover White. I then did all the weathering right on the basecoat.
After evening out the runs and adding weathering... the final result:
In warm light...
Compare with the real thing...
So why does the part 3 hock appear white? It could be that they started shooting before it had properly yellowed, which takes about 3 days. It seems more likely, however, that the bright stage lights they used for night-time shooting washed out the transparent yellow layer and reflected off the white paint beneath.
So there you have it. This is most likely how the movie masks were painted: a basecoat of white paint, followed by an amber patina varnish. If you want to paint one of these, You may want to add a cracking medium on top of that if you're doing the hero mask. Be forewarned: varnish is tough to work with on a hockey mask, which is probably why David Miller and all later hockey mask painters just used acrylics and oil paints. Thanks for reading!